Gen 1 SV650 Race Bike Parts

Discussion in 'Accessories & Parts' started by Andrew Marles, Feb 19, 2012.

  1. Andrew Marles

    Andrew Marles Member

    Joined:
    Nov 8, 2010
    Messages:
    193
    Likes Received:
    21
    Doing some upgrades on my race bike over the winter and have some spare parts for sale.

    Clean and straight front forks, reworked by RMR suspensions with Race-Tech emulators and springs. 1.0 kg/mm springs. Preload adjustable fork caps. Stickers add 1-2 hp.
    Sold!

    Woodcraft SV650 clipons (41mm), just the clamps.
    $50

    Front brakes, calipers and master. Spiegler SS lines, and I think Vesrah race pads - lots of life left on the pads.
    $100

    Front wheel - straight. Some scuffs here and there from tire changes. Does not include the tire.
    $100

    two sets of rotors. I measured one at 4.4/4.3 mm
    $70

    Other set is 4.6/4.5 mm.
    $80

    Front wheel - bend in lip, holds a bead just fine. Can be repaired. Does not include the tire.
    $30

    AFAM GSXR aluminium rear sprocket. 520 pitch, 42 teeth. New, never opened. Type is listed as zx-6/zx-6r/gsx-r. Does not fit stock SV650 rear carrier.
    $70

    Top triple.
    $50

    Lower triple.
    $60

    Front axle+spacer.
    $20

    GSXR front fairing. I think it is Hotbodies for the 2000-2003 600/750. No major flaws or cracks, somewhat decent paint, but the lower could use another coat (check the pictures). Has been drilled for motosliders and has dzus mounts on the lower.
    $50

    Over The Top Performance aluminium SV650 fairing stay. Much lighter than stock. It's not 100% straight but is fully functional and can be adjusted the way you need it.
    Sold!

    Instrument cluster. Can only promise the tach worked the last time I used it (speedo was disconnected long ago and taped over).
    $25

    Pictures of everything are in this album http://s590.photobucket.com/albums/ss348/drewnabobber/SV650%20parts%20for%20sale/

    Please PM me with any questions or offers. Buyer pays shipping if you can't do a local exchange. If you want a package deal on some parts make me an offer and we'll chat.
     
    Last edited: Feb 21, 2012

Share This Page