Race-ready 2010 Ninja 250 $4,800

Discussion in 'Bikes' started by racingredhead, Jan 25, 2014.

  1. racingredhead

    racingredhead New Member

    Joined:
    Jun 16, 2013
    Messages:
    12
    Likes Received:
    0
    Race-ready 2010 Ninja 250 $4,800

    250 at GMR.png
    - rear sets
    - clip ons
    - proper air cleaner set up
    - race tech suspension
    - Penske shock
    - Graves pipe
    - Ivan jet kit
    - Scotts steering damper
    - programmable two-map ECU
    - custom frame sliders (required for Greg Moore Raceway)

    Running 520 chain with 110 Pirelli supercorsa front and 120 rear.

    This is one of three identical bikes built by/for Adam Faucette, Bill Cameron (owner of Skagit Powersports) and Mike Tobin. Mike bought it new and raced one full season with 2nd place finishes in WMRRA & OMRRA. I bought the bike from Mike in the Fall of 2012. Paid $5,800 for it. Raced it from April to July 2013. Went down a couple of times in the rain. No major damage but bodywork is scratched on both sides.

    I had the bike dyno'd and tuned by MAS. Is producing 31.4 hp, 15.6 ft-lbs torque. Dyno sheet available.

    A great bike. 100% race ready.

    Have front & rear stand and tire warmers for additional price.

    Call or email Marybeth 778 840 2277 Marybeth@pro.net

    Pics don't seem to be uploading. Please email me for pics. Oh wait. Here they are :)
    250 tank.jpg 250 scotts.jpg 250 right.jpg 250 left.jpg 250 front.jpg 250 at ridge-small.jpg
     

    Attached Files:

    Last edited: Jan 25, 2014

Share This Page