mspeedPerformance Dyno Day

Discussion in 'General Racing Chat' started by Marbod, Apr 7, 2010.

  1. Marbod

    Marbod Rubbin's racin'

    Joined:
    Dec 8, 2005
    Messages:
    165
    Likes Received:
    0
    Better late than ever, mspeedPerformance will be having it's 6th annual Dyno Day on Sunday, April 25th. " Beverages" and Appies supplied as usual. Prizes for most hp for 600's, Twins and Literbikes.
    We've always had this on Saturdays before but due to MAS Dyno only being available on this date, Sunday the 25th it is.
    We'll start around 11 and keep going till the city shuts us down.
    If you can RSVP , it'll help with getting provisions.
    See you there!!!
     
  2. Brett

    Brett Twin Brothers Racing WMRC Exec

    Joined:
    Dec 22, 2005
    Messages:
    158
    Likes Received:
    0
    Storm helping out again? Or did I abuse your hospitality too much at the last event?
     
  3. Dean

    Dean Just a beer league racer

    Joined:
    Dec 7, 2005
    Messages:
    2,779
    Likes Received:
    1
    I'm in! I might bring the RC this time to dyno, and I'll see if I can fit the Dorso in there too!
     
  4. Marbod

    Marbod Rubbin's racin'

    Joined:
    Dec 8, 2005
    Messages:
    165
    Likes Received:
    0
    There's another 1200 gallons of Storm Brewing's finest waiting for you, Brett. That probably leaves Jason and Dean high and dry though...
     
  5. tt600

    tt600 New Member

    Joined:
    Jul 26, 2008
    Messages:
    298
    Likes Received:
    0
    Is mike able to do some tweeking also marbod?
     
  6. Jaybo

    Jaybo if you want blood

    Joined:
    Dec 28, 2005
    Messages:
    375
    Likes Received:
    2
    :cheers:i'm in. better get another 1200 or so gallons. I think Jac can make it too.
     
  7. jcathie

    jcathie Member

    Joined:
    Feb 15, 2006
    Messages:
    362
    Likes Received:
    6
    So then you mean another 2400 gallons, right?
     
  8. Jaybo

    Jaybo if you want blood

    Joined:
    Dec 28, 2005
    Messages:
    375
    Likes Received:
    2
    well, Jac and I are in racing shape so we'll go easy and share the 1200 gallons.;)
     
  9. rustysgsxr

    rustysgsxr Rooster

    Joined:
    Oct 15, 2006
    Messages:
    115
    Likes Received:
    0
    I'm in, if the doors not locked when I get there!
     
  10. rustysgsxr

    rustysgsxr Rooster

    Joined:
    Oct 15, 2006
    Messages:
    115
    Likes Received:
    0
    I'm in, if the doors not locked when I get there!!!!!
     
  11. Bernie32

    Bernie32 Free Highside Demoes

    Joined:
    Dec 13, 2005
    Messages:
    213
    Likes Received:
    0
    Ok......seriously.........what were some of the HP numbers? Who won highest?
     
  12. dasein

    dasein WMRRA #24

    Joined:
    Nov 7, 2009
    Messages:
    160
    Likes Received:
    0
    When I left my 08 ZX10r was highest at 160.6.
    My K3 gixxer 600 came in at 103.8.

    The Busa was 158+, the nitrous equipped ZX12 was 160. less than 6, so very close to me (and would have rocked over 200 with the bottle, I am told).
     
    Last edited: Apr 26, 2010
  13. Bernie32

    Bernie32 Free Highside Demoes

    Joined:
    Dec 13, 2005
    Messages:
    213
    Likes Received:
    0
    :devil:You should have had the race mods I had on my ZX10:eek: ....sssshhh
     
  14. dasein

    dasein WMRRA #24

    Joined:
    Nov 7, 2009
    Messages:
    160
    Likes Received:
    0
    PM me more...

    Mods are PC5 with autotune running in active mode, +/- 20% (risky, I know).
    Blocked off air injection.
    FMF pipe, no baffle.
    Gutted cat.
    TRE (awesome effect on this bike, probably the only mod I should have done).
    Servo eliminator.
    Race Teched front and rear.
     
  15. Jayson

    Jayson Highside Racing

    Joined:
    Dec 13, 2005
    Messages:
    367
    Likes Received:
    0
    The only mod on Bernies ZX10 was an auto highside function !!!!!


    My GSXR did 123.2 ...
     
  16. Bernie32

    Bernie32 Free Highside Demoes

    Joined:
    Dec 13, 2005
    Messages:
    213
    Likes Received:
    0
    Yes, it did have that damn eject button. Also had Kawasaki race ECU (No rev limiter), Kawasaki race head gasket (Both KR parts ordered through Kawasaki rep direct from Japan- can only be done twice a year), Stock pipe no baffle but butterfly valve for low grunt, Shaved fly wheel (super fast spool up) and K&N filter. one down in front and 3 up in the rear. Only thing I wouldn't redo is 1/4 turn cammed throttle. I loved that bike. My next mods would have been suspension.
     

    Attached Files:

    Last edited: Apr 26, 2010
  17. Bernie32

    Bernie32 Free Highside Demoes

    Joined:
    Dec 13, 2005
    Messages:
    213
    Likes Received:
    0
    Jay, I took off the eject button and had your mechanic stall it on your seven fiddy.....with a small donation from Welton of course. Number 97 should be a thrill to watch this year.
     
  18. dasein

    dasein WMRRA #24

    Joined:
    Nov 7, 2009
    Messages:
    160
    Likes Received:
    0
    Yeah, edit my earlier post to read that the TRE is the only engine mod I should have done. The Racetech parts and resprung front transformed the bike, it no longer kicks me in the ass, runs wide, or hunts around. Laser like now. Honda like...:)

    Did you ever dyno it?

    http://www.youtube.com/watch?v=ltNhAyv1CCc
     
  19. Jayson

    Jayson Highside Racing

    Joined:
    Dec 13, 2005
    Messages:
    367
    Likes Received:
    0
    Hmmm, I wondered what all that popping noise was on the dyno yesterday ....

    here I thought it was just a little pump gas detonation... might have been a little lean, I was trying to sandbag the numbers on the dyno.... :devil::devil: :rolleyes:
     

Share This Page